Sunday, 1 September 2013

Wall mounted aquarium PC

So here is the culmination of four months hard work and tinkering.



Why?
There were several reasons for me choosing to make an aquarium PC. Firstly, as an experiment into long term heating effects on hardware. I have had several "always on" and gaming PCs in the past, and they only seem last a year or two before malfunctioning; whether it be the graphics card, memory or HDD at fault (despite having lots of cooling fans). I am hoping that the higher specific heat capacity of oil will facilitate a more consistent temperature throughout the PC, with the internal fans and air bubbler providing a "stirring" effect. If it turns out to be reliable and stable then I will look into building a gaming version!

Finished aquarium
Secondly, as a piece of art. My man-cave is a constantly evolving beast in need of the latest gadgetry and focal points of interest to stimulate conversation.

And lastly, as a way for me to test out the difficulty in working with new materials and tools (specifically thick acrylic) so I can apply these to other projects in the future.

There are lots of other examples on YouTube that I encourage you to take a look at. There is also a commercial desktop aquarium PC that you can buy from Puget Systems that is designed for mineral oil.

9L Aquarium
The Aquarium
The main 9 litre wall mounted aquarium was purchased from a website within the UK for £100. The tank is made from glass which has been stuck together in places using what appears to be a silicone based glue. The tank is encased in an MDF frame with a gloss finish to the forward facing areas. There are two supportive glass struts at the top of the tank, on to which a glass lid is normally placed. These struts now form the main supports to the custom acrylic motherboard mounts as described below.




Inside the Aquarium
I constructed the motherboard and accessory plates from 10mm thick acrylic. This thickness is extremely rigid and will not bend when loaded with hardware. I found it very difficult to work with; a jigsaw blade generates so much heat that the acrylic reseals itself. I had to use a milling machine to cut the two rectangles in the pictures below. Drilling and tapping holes is also "interesting"; I found using rubbing alcohol whilst drilling cooled down the drill bit enough as to not melt the acrylic.
Motherboard and accessory panels
Completed motherboard panel (with some test memory)
Panel supporting USB Relay, Thermometer, TTL LED trigger and SSDs
Assembled panels ready to put inside aquarium

The Oil
5L Silicone Oil
There are hundreds of types of oil that I could have used in this project, ranging from Johnson's Baby and pure mineral oils, to transformer and immersive surgical oils. I ended up opting for Silicone-350 oil since its auto-ignition point is 400 degrees C (well above the 125 degrees C maximum CPU temperature), its viscosity remains almost constant with varying temperatures and it is relatively cheap at £39 per 5 litres from Mistral Lab Supplies.

PC Specifications

This PC has to be energy efficient since it is always left on. I also wanted to avoid having to use an external radiator and so needed to opt for a processor with low heat output; I therefore settled on an Intel Atom based motherboard.

All of the components ready for assembly
I also wanted to have everything submerged, including hard drives, and so bought two SSDs. This also serves as a redundancy if/when one decides to fail.

The specifications are as follows:
  • ASRock AD525PV3 Motherboard with built-in Intel Atom D525 processor
  • 4GB 1333MHz Ballistix Tracer Memory
  • 2x 64GB Samsung Solid State Drives
  • 205W Power Supply

Cost

Here is a breakdown of the costs (including postage). Most items are from eBay and some items are second hand.

Wall mounted aquarium: £100
ASRock AD525PV3 Motherboard: £60
4GB Ballistix Tracer Memory: £30
Acrylic for motherboard base plate and I/O panel: £11.20
Shuttle Power Supply Unit: £22.81
USB Wifi Dongle: £3.78
SATA power splitter: £1.55
NM2 nylon standoff spacers: £1.67
MicroSATA to SATA adapters (x2) £1.67 x 2: £3.34
64GB solid state drives (x2) = £55.32 + £45.00: £100.32
RGB LED Tape: £10.79
80mm blue LED fan: £1.57
40mm blue LED fan: £4.95
Power switch: £2.16
10L Silicone-350 Oil: £78
Bio-orb aquarium pump: £8.49
Bio-orb extension cables: £11.98
Silicone hose: £2.34
Bubble bar: £3.19
Glass suckers: £1.98
4-channel usb relay: £22

Total Cost: £482.12

Performance

Please check back to get updates on performance metrics and reliability as I measure them in due course.

11 comments:

  1. This is AMAZING.

    How much for one?

    ReplyDelete
    Replies
    1. Thanks! Cost me just shy of £500 :-)

      Delete
  2. Thanks for informative post. I am pleased sure this post has helped me save many hours of browsing other similar posts just to find what I was looking for. Just I want to say: Thank you!
    Cheap Radiators & Radiator Fans

    ReplyDelete
  3. May I know if you had any problems with the set up till date ? Planning to build one and stumbled across this.

    ReplyDelete
  4. It has been running constantly since I built it and is very stable. The oil temperature fluctuates slightly depending on the ambient temperature in the house - from 45 C in winter to 55 C in summer.

    The only noticeable ailment are the LED tape lights inside. The LED brightness has slightly decreased over the course of the year.

    I am in the middle of building a second "gaming" version at the moment, I will upload all of the details in the next week or two once it's complete.

    Goodluck with your build :-)

    ReplyDelete
  5. Wonderful Wall Mount Post and List. Thank you So much


    ----------------------
    HDMI Cables Online

    ReplyDelete
  6. Why silicone oil and not mineral oil? And can recommend a website to get the silicone oil from? I am building one as well, tho more basic for now. Any help would be great. Thanks!!!

    ReplyDelete
    Replies
    1. Silicone oil has a higher auto-ignition point and is therefore a little safer than Mineral oil if something goes wrong and it heats right up.

      Silicone oil is quite expensive. I got mine from here: http://mistralni.co.uk/products/silicone-oil-350-polydimethylsiloxane

      Good luck!

      Delete
  7. Hi benji, nice work! I see U posted it in 2013, so now is 2016 is computer still running and working? Any problems, even small during 3 years?

    ReplyDelete
    Replies
    1. Thanks! The PC has been left on constantly since I finished it and I haven't had any problems at all actually. The system is still fine speed-wise for what I use it for so hopefully I'll get a few more years out of it before needing to upgrade.

      I have since built another gaming version which is also holding up well: https://www.youtube.com/watch?v=eG3lR-eDwKQ

      Delete